Riken简单的固定氧气浓度仪OX-600（0-25 vol％）遥控传感器（20m）AC 100V规格（带有可追溯性证书） OX600-20C 00 X2000

目标气体：氧气
深度（mm）：35.5
高度（mm）：120
检测范围：0-25 vol％
宽度（mm）：80
检测原理：diaphragm palvanic电池供电 - 元电池 - 浓度 - 浓度
绿色
Display resolution (vol%): 0.1
Detection method: Diffusion type
Alarm setting value: 1st19 vol% ( L)/2nd18vol% (LL) [Standard setting value] Instruction accuracy (under the same condition): within ±0.7vol% Response time (under the same condition): 90% response within 30 seconds Alarm delay time (under the same condition): Within 5 seconds of detection of 10 to 11vol% gas in the oxygen deficiency alarm (18vol%L alarm) Accuracy of alarm setting value: The difference between the alarm setting value and the concentration indicated value when the alarm is issued is 0 Gas alarm type: 2-stage alarm (L-LL) Gas alarm display: 1st: concentration indicator and backlight on (orange) Buzzer/2nd: concentration indicator and backlight on (red) Buzzer Gas alarm operation: Self-hold Gas alarm contact: 1a voltage-free contact each, always de-energized (excited at alarm) Fault alarm/self-diagnosis: System abnormality/sensor connection abnormality Fault alarm display: Content display and backlight flashing (red) Buzzer Fault alarm operation: Automatic recovery
Contact capacity: AC125V, 1A
Transmission specifications: DC4 to 20mA (non-insulated, load resistance below 300Ω)
Cable between detection部分：远程专用电缆（20M）
电源：AC100V±10％，50/60Hz
电力消耗：AC规格：最大5VA
操作压力范围：大气压（80kPa至105kpa）

-

200G

-10至40°C（没有突然变化），90％或更少（无凝结）

traceability证书（1套） *文档的细分包括：气体检查报告（气体制造商发行的认证），曲齿性系统（用于气体生产的跟踪系统图），露骨性图表（设备的跟踪系统图和设备的跟踪系统图和测量工具）

-

-

-